From trainee to engineer

A typical career at Schmale[more]

New special machine delivered

Cold & warm forming[more]

Whitsun sailing 2023

Tomorrow, Friday, it's "Cast off" again for part of the Schmale staff. Over Whitsun, more than 30 colleagues will join the sailing crew and sail on the Ijsselmeer and Wadden Sea in Holland. The 50 meter long barque...[more]

Report on our X2000NC in trade magazine "Draht"

In its latest issue, the trade magazine "Draht" reports on the high cycle performance and great variability of our X2000NC in the production of seat stays for passenger car seats. Fortunately, the article can not only...[more]

Novelty: Integrated linear transfer

New possibilities with the new transfer variant[more]

Trade fare INTEC in Leipzig

Virtual operation of a schmale machine at the TU-Chemnitz booth[more]

X2000NC available at short notice

Our standard machine with short delivery time[more]

New special machine under construction

Just as the last plant was delivered and we had some space in the assembly hall, the machine body for the next, large special machine arrived.  The control cabinet construction for the machine has been going on for quite...[more]

Willkommen bei schmale!

Qualifizierten Fachkräfte zu bekommen, wird in diesen Tagen immer schwieriger für Unternehmen. Daher bilden wir selbst aus und freuen uns, wenn wir gute Mitarbeiter nach der Ausbildung im Unternehmen halten können. Christina...[more]

New assembly line delivered

In the first days of the new year, an assembly line for marrying car doorstrikers with base plates has been deliverd. The component is riveted and is safety relevant for every car. Door strikers have to withstand the highest...[more]

Happy new year

We wish you a fantastic start into 2023[more]

Merry X-mas and a happy new year.

The year is coming to an end and we are also slowly experiencing peace and quiet in our company. We wish you a happy and reflective holiday season and a happy new year.  [more]

10 years X2000NC

Our most versatile plant type celebrates its birthday[more]

Schmale supports sports youth

The Minis of FC Altena 69 - youth department are happy about new pop-up goals. [more]

The digital twin is on its way

First 3D visualisation of Schmale plants in the Co-TWIN project[more]

New X2000NC Video

Manufacture of brackets for hoods[more]

New X2000NC delivered

On its way to the USA[more]

New X2000NC in production mode

Complex wire forming on video[more]

Result "Stadtradeln" (city cycling)

5.647 km in three weeks[more]

New plant for strip processing

Including housing and container management system[more]

Neuer Azubi

Ein Ausbildungsplatz ist noch unbesetzt[more]

Stadtradeln 2022


Funding by the federal government possible!

Replace an old machine with an energy-efficient unit from Schmale and take advantage of subsidies from the Ministry of Economics.[more]

New plant deliverd

Strip processing from reel to welding station[more]

wire & tube 2022

Short statement about the fair (german language)[more]

New plant delivered

A few days ago, another new line for strip processing left us. Here are pictures of the dismantling after the successful preliminary acceptance. A special feature of this machine is that it is equipped with a sound insulation...[more]

Jobrad Leasing

Many employees make use of the offer[more]

SWOT Analysis Workshops

The opinion of our employees is important to us. As an innovative company, we rely on ideas and suggestions for improvement from our employees. For this reason, we have conducted SWOT analysis workshops across all departments.The...[more]

New sales representative

Since a few weeks David Potrikus strengthens our sales team.[more]

Special machine delivered

March 2022[more]

2. Platz beim IFE Award

Das wäre doch fast untergegangen...[more]

New clamping ring plant delivered!

A few days ago one of our clamping ring machines left us again. The machine was loaded onto a truck with two large forklifts and delivered to a company in Europe. The system can automatically produce a wide range of tension rings...[more]

Thread rolling as a station on the X2000NC

Fast and with correctly positioned feeding[more]

Company sailing trip to the Wadden Sea

A few impressions from our company sailing trip to the Wadden Sea and West Frisian Islands.We have been sailing, cooking and celebrating together for 4 days.It was nice and it has welded us together as a Schmale...[more]

Three new trainees at Schmale

We are pleased that we were able to win three new trainees for our company this year.Tom Senne is doing his apprenticeship as an electronics technician for industrial engineering with us. Christina Sablotny is doing an...[more]

MX Award

Assessors visit our company[more]

Wir expandieren weiter und suchen neue Mitarbeiter

Diverse freie Stellen in unserem Stellenmarkt[more]

The new maintanance tool

Predictive maintanance on our operating panel[more]

Flood in Altena

Schmale employees help [more]

Der Kracher des Jahres

Wettbewerb der Südwestfalenagentur[more]

We can do strip too!

New video shows our technical possibilities[more]

Schmale goes east

First X2000NC put into operation in Kazakhstan[more]

First X2000NC delivered to Russia

Первый X2000NC доставлен в Россию[more]

New plant delivered

A few days ago another X2000NC system left us. The machine was loaded onto a truck with two large forklifts and delivered to a company in the Märkischer Kreis, where it now produces bending parts from wire and tube at high cycle...[more]

Fast tube bending on the X2000NC

New Video on our Youtubechannel[more]

Happy Easter

Stay healthy![more]

Refitting completed

Only LED Lights left[more]

Virtuell commissioning

Plant optimization already in the construction phase[more]

Fast finger bender technology - It's Actiontime with 40 parts per minute

New video[more]

Nomination for industry award

We were nominated for the “Grand Prize for Medium-Sized Enterprises”. This award, given annually by the Oskar-Patzelt Foundation, is one of the most prestigious industrial awards in Germany. Only companies that have been put on...[more]

Research and development in the pandemic

We are part of the SIHK's #gemeinsamdurchstarten campaign[more]

Referencing the transfer

A service video[more]

Schmale is now part of the " Competence Network"

We are now part of the “Competence Network”. This “network of the best” (self-promotion) awards the “Grand Prize for medium-sized companies” every year.If you think that we might deserve the award, then we would be very happy to...[more]

Service at Schmale

A video report[more]

Farewell to retirement

This week our colleague Rainer from the assembly department had his last day at work. We say goodbye to one of our best fitters and wish him a good time in his well-deserved retirement.Rainer- We thank you for your commitment,...[more]

At the turn of the year 2020/2021

It was a special year that everyone will probably remember for a long time.[more]

First video of our new 400 ton servo press

The heart of a new press line[more]

New custom machine delivered

Top secret[more]

Press line delivered

Premiere for the new 400 ton servo press[more]

Servoelectric decoiler

New and intelligent drive for decoilers[more]

Qualitätsmanagement bei der Rohrverarbeitung

Neues Video in unserem Yotubekanal[more]

Quality management in forming technology

Process monitoring and quality management[more]

The butterfly effect

Just missed the 100%[more]

Two plants delivered

Two systems left our assembly hall this week after a successful preliminary acceptance.A special machine will remain in Germany and will manufacture metal rings with laser welding.The other system, an X2000NC type, is well packed...[more]

We have been awarded

We proudly received the seal: Innovative through research[more]

Protective caps

Protection for control cables[more]

Gap closure

Newly developed servo press with 4000kN press force[more]

Technical report on our X2000NC with finger bending technology

The magazine "" is currently reporting on our new X2000NC with finger bending technology. The report details the advantages of the technology. And the maximum cycle rate of the system is also revealed ......[more]

It's all in the flow

One plant goes out, the next is built[more]

Special page on X2000NC finger bending technology

A special technical innovation deserves a special appearance[more]

Unterstützung für örtliche Kindergärten

Spenden an Fördervereine[more]

Schmale on TV

Report on local TV station[more]

New X2000NC wire bending machine with cnc-Fingerbenders

Second video online[more]

NRW Minister for Economic Affairs Andreas Pinkwart visits Schmale

Report and video[more]

Donation to the Balthasar Children's and Youth Hospice

A facility that does a great job[more]

Nobody can imitate us that quickly

New CNC bending plant as a demonstration machine[more]

Support for non-profit associations and organizations

Against the sexual exploitation of children[more]

Easter 2020

We support children![more]

Use the time now

Have your SCHMALE plants serviced now[more]

Schmale and the Corona virus

First of all: the business continues "almost" normally[more]

Technologydays 2020 postponed

Due to the current developments around the corona virus, we have decided to postpone the technology days to a later date. Appointments already made with our sales department can be confirmed in individual cases.[more]

Trade fair "wire 2020" in Düsseldorf will be postponed

SCHMALE TECHNOLOGY DAYS 2020 take place![more]

Special machine for strip processing

Industry 4.0? Check![more]

Double reversible reel

new in our delivery program[more]

We even can be red

New plant delivered in the color of our customers choice[more]

Gratulation zur bestandenen Prüfung

Wir gratulieren unserem Auszubildenden Niklas zur Abschlussprüfung als „Elektroniker für Betriebstechnik“. Leider ist Niklas ganz knapp an der Note 1 vorbeigeschrammt. Macht aber nichts. Er qualifiziert sich jetzt weiter und...[more]

Merry Christmas and all the best for 2020

The year ends and we want to thank all our employees, customers, suppliers and friends for the good cooperation. We wish you a Merry Christmas and good luck, health and success for 2020.Between the 12.21. and 1.2. we shift down...[more]

Maschinenmarkt "Products of the year 2019"

Schmale is again on the leaderboard[more]

Retrofit and sustainability

New technology for old steel[more]

New special machine dlivered

Plant for machining of profile tubes[more]

X2000NC with wall extension

New video online[more]

Südwestfalenaward for Schmale

Award for Social Media activities[more]


New plants delivered

We flexibly serve individual customer requests[more]

Milestones in research and development

Constant innovation as an investment for the future[more]

Tube processing on the SPEEDMAX L

New video shows the machining of pipe[more]

12mm wire on our new SPEEDMAX L

New video shows processing of solid material[more]

Schmale Maschinenbau now on Instagram

Have you seen it yet?[more]

Assembly machine for safety bolts

New Video in our youtube channel[more]

Press reports on the SPEEDMAX L

Various reports also in online media[more]

Federally funded research and development partnership for digital twin

Schmale is part of Co-TWIN projekt[more]

Displaying results ###SPAN_BEGIN###%s to %s out of ###SPAN_BEGIN###%s
<< First < Previous 1-100 101-139 Next > Last >>


We are here for you

  • Original spare parts
  • Technical customer service
  • Instruction & further training
  • Service packages
  • Advice/development
  • Online fault reporting

Service ...

Benötigen Sie Hilfe?

Selbstverständlich stehen wir Ihnen gerne
persönlich zur Verfügung. Sie erreichen uns
Werktags zwischen 08:00 und 16:00 Uhr.

Gerne können Sie auch Ihren persönlichen Ansprechpartner kontaktieren ...

+49 (0) 23 52 / 548 64-0

+49 (0) 23 52 / 548 64-01

E-Mail senden